SIRIUS PIR / Occupancy / Motion sensor - Model No: R1012W1 Recessed mount type

SIRIUS motion sensor review (832 ratings)   Availability: In stock
Rs. 1399 28% Off
Rs. 999
<<< Back to shop

Product Description

MODEL: R1012W1 - Recessed mount;
              Mode - Full Auto/Off/On capability with anti-static properties. Use as a regular switch under 'Off'                 and 'On' mode.
              Use as an automatic motion sensor switch under 'Auto' mode

Mounting Type: RECESSED MOUNT - For false ceiling mounting

SIRIUS TITANIUM series R1012 electrical energy saving occupancy sensors are PIR based occupancy sensors used for the automatic switching of electrical appliances of up to 1000VA. The sensors can be easily integrated with any existing power device. The enclosures are manufactured at an ISO 9001:2008 manufacturing facility and are a result of joint collaboration between Indian and US engineers. 

1. Auto switching of lights or other fixtures based on human occupancy in residential and commercial buildings.
2. Security systems for triggering of Buzzers or switching on Camera/DVR when human motion is detected.
3. In laboratories such as clean rooms and chemical and industrial labs.etc.

Dimension: Approx 80mm x 80mm x 36mm
Power: AC 230V ±20V, 50~60Hz
Loading: Max 1000VA or Maximum of 3 fixtures whichever is smaller
Detection Zone: 360 Degree preset or 180 degree adjustable
Detection Distance: Upto 6m or 20feet
Time adjust: 40s±2s  to  45mins±1min  adjustable
Photocell/Daylight auto ON/Off: Sunlight intensity sensing to prevent switching ON of lights when there is sufficient daylight.
Power consumption:  1Watt ±0.2 during active
                                   0.6Watt ±0.2 during idle at
                                   230V, 50Hz and 27 degrees celsius
Humidity:  <94%RH non-condensing; 30 degree celsiusmaximum dewpoint
Operating modes: “Auto/OFF/Always ON” mode selectable. Can act as a regular switch or as an Occupancy/Daylight sensor
Sensor Type: Infrared sensor with built in interference suppression
Sensitivity control: Available across all models
Signal re-triggering mode select: Available across all models
High Voltage and Current protection: 5A fuse and Varistor
Enclosure: Manufactured at an ISO 9001:2008 facility
Material: HDPE and ABS
Colour: Titanium Brilliant

Special Instructions:
1. Do not face sensor directly towards sunlight.
2. Do not face sensor towards air vents or air conditioners as this may cause false activation.
3. Can be easily integrated with any existing power device. A professional electrician for installation is recommended.

Wiring Diagram

Occupancy sensor wiring

Merchant account,
Credit Card Processing
Payment Gateway



| | | |